| |
Hardware Troubleshooting Guide |
 |
Hardware Troubleshooting Guide
for the S50 - SFTOS |
|
How Do I Troubleshoot the 10-GE
Interface? |
| |
|
Frequently Asked Questions |
|
How
Do I Reset the S50 to Factory Defaults? |
|
How
Do I Assign an IP Address to Manage the S50? |
|
How
Do I Configure a Port for Portfast or Edge Port Mode? |
|
How
Do I Configure Spanning Tree? |
|
How
Do I Configure VLANs? |
|
How
Do I Create a Port Channel / LAG Group? |
|
How
Do I Enable or Disable Auto-Negotiation? |
|
How
Do I Login to the Console? |
|
How
Do I Reset the Password? |
|
How
Do I Save, Store and/or Apply a Configuration File? |
|
How
Do I Stack S-Series Units Together? |
|
How
Do I Configure System Information on the S-Series? |
|
Why
Can’t I Configure Routed VLANs Using OSPF and RIP? |
|
How Do I Control Management Access to
the S50 with ACLs? |
|
How Do I Enable RMON? |
|
What Should I Poll With SNMP? |
|
Why Can't I Telnet to the S50? |
|
How Do I Enable Network
Management Functions? |
|
How Do I Set the Date and Time and
Configure SNTP? |
|
How Do I Set the MTU? |
|
How Many MAC Addresses Are
Supported? |
|
How Many Route Entries Are
Supported? |
|
How Do I Configure Load Balancing? |
| |
|
Technical Tips |
|
Troubleshooting OSPF |
|
Configuring and Troubleshooting TACACS+ |
|
Configuring and Troubleshooting VRRP |
|
Configuring
Broadcast Storm Control |
|
Configuration Example for TACACS+ |
|
Configuration Example for RADIUS |
|
Configuring OSPF MD5 Authentication
Between E-Series and S-Series |
|
Understanding
and Enabling Flow Control |
|
CX4 Cable Compatibility Matrix |
|
|